High Quality Discarded Tire Slitter / Discarded Tire Strip Cutter / Waste Tire Strip Cutter / Waste Tire Crusher / Waste Tire Shredder (TPS-DTSC1200)
This machine is used to cut the whole tire, rubber pieces, rubber board into rubber bars.
The whole project should include the following steps:
1. Ring cutter
This machine mainly used to cut the sidewall of steel wire tire, and then to the next step of segmentation. First, put the tire on the platform, then rotate the hand wheel, the three claws will stick the inner tire firmly, Second, Starting power, work platform will rotation, cutting tool according to need to cut tire slowly step by step. Until the tire side cut off.
2. Strips cutter
Strips cutting machine can cut cycle machine to remove the wire tire sidewall cut into strips, and the width of the adjustable section. Two circular knives for special materials, hard and durable, can be used repeatedly grinding for no more than 1200 steel tires.
3. Block cutter
Block cutter is designed to cut car, truck and rear tractor tire. Range is up to 120cm truck tires. The tire cutter adds flexibility to your total tire cutting system by providing you the opportunities of accepting tires up to 120cm into your system, The unit also allows your system to cut 60-70 truck tires per hour or 120-150 car tires per hour.
4. Bead wire separation
Be utilized to separate rubber and steel wire of bead in order to get whole steel wire.
Feature: It is easy operation, easy to be installed and maintained high efficiency and clean etc.
5. Tyre crusher
This machine is mainly used to crush waste tire and rubber. The structure is gear transmission.
Structure:
This kind of machine consists of seat, Rack, two rollers, motor, cooling system, heating system etc
1. Rollers are made of chilled cast iron, which are abrasion resistant with long service life.
2. Rear roller is equipped with distance adjustment device, easy operation and convenience, turn the turbine to adjust the distance
3. Perfect emergency stop device can ensure the safety of personnel and equipment.
4. The seal structure with special design can eliminate the leaking phenomenon of lubricating oil.
5. Human nature designed operating system reduces labor intensity
A load test running will be made to the assembled equipment in our company to save debugging time for customers.
1)Gap adjustment mode:
Manual or auto; Grease or thin oil
2)Lubricating method:
Manual or auto; Grease or thin oil
3)Emergency stop device
Pull rod and emergency button
4)Roller bearings:
Nylon Bushing or Copper Sleeve or Spherical Roller Bearing
Welcome to send me email for more detailed information of this project.
| Motor power |
production capacity |
tyre size |
size of the bar |
machine size |
weight |
| 5.5kw |
20tyres/hr |
≤1200 |
35-55mm |
1230*650*1580 |
800kg |
Audited Supplier 
){kind=link}
){kind=link}